Tel: +86-755-85292276 18925261056 info@cnnewbridge.com
Shenzhen, China

Industrial PoE Switch

HOME > Products > Industrial Switch > Industrial PoE Switch

8 Port 10/100M/1000Mbps PoE Unmanaged Industrial Ethernet Switch|Newbridge ND2PG08TX

Hot Sale
Front
Front
Front
Front
Front
Industrial PoE Switch

10/100M/1000M 8 Port PoE Unmanaged Industrial Ethernet Switch - Newbridge

Newbridge 10/100M/1000M 8 Port PoE Unmanaged Industrial Ethernet Switch with high effiency and stable performance

FEATURES

  • Supports 8 10/100/1000Base-T(X) electrical ports compliant with IEEE 802.3af/at PoE standard

  •  Each PoE port can provide up to 15.4W/25.4W 48VDC power output

  • Automatic identification of power consumption and power supply mode of network equipment

  • Electrical interface (RJ45 interface) supports 10/100/1000M self-adaptation, full/half duplex mode, MDI/MDI-X automatic detection

  • Support full-duplex and half-duplex auto-negotiation.

  • Comply with IEEE802.3/802.3U/802.3x store and forward mode.

  • Dual power DC9~48V redundant input.

  • Wide temperature working range -40℃~+85℃.

  • Industrial grade design, no fan, no cooling hole.

  • High-strength corrugated profile housing, rail mounting, IP40 protection level


      Newbridge® The ND2PG08TX PoE unmanaged industrial Ethernet switch is specially designed for harsh and harsh industrial environments. It is equipped with 8 10/100/1000Base-T(X) Ethernet copper ports with PoE function. Each PoE electrical port can provide a maximum of 25.4W power supply for PoE terminals conforming to the IEEE 802.3af/at standard while transmitting Ethernet data, which is especially suitable for application scenarios where it is difficult to provide AC power and the cost of wiring is high.

As a Power over Ethernet Equipment (PSE), it supports 8 fully IEEE 802.3af/at compliant PoE and Ethernet composite ports, each PoE port can provide up to 15.4W/25.4W of 48VDC power output. Power supply for PoE IP cameras and wireless APs through network cables, eliminating the trouble of installing power supplies and power cables separately, and providing you with an economical and efficient industrial Ethernet communication solution.

ND2PG08TXPoE industrial Ethernet switch adopts industrial grade design: operating temperature range -40℃~+85℃, provides redundant dual power input, meets EMC industry level 4 requirements, IP40 protection level, aluminum chassis heat dissipation surface design, no fan, no Vents, rail or wall mount, certified for hazardous environments and FCC, CE compliant. It meets the reliability and practicability requirements of the industrial site for the network system. Its robust hardware design is ideal for industrial communication applications that require continuous operation.



Newbridge® The ND2PG08TX PoE unmanaged industrial Ethernet switch Application

Product Name

8 Port 10/100/1000M Umanagement industrial grade PoE switch

Product Model

ND2PG08TX

Interface

8x 10/100/1000Base-T   ports（ PoE）

 

Network Protocols

IEEE802.3 10BASE-T;   IEEE802.3i 10Base-T;IEEE802.3u;100Base-TX/FX; IEEE802.3ab 1000Base-T;

IEEE802.3z 1000Base-X;   IEEE802.3x;IEEE802.3af, IEEE802.3at；

IEEE   802.3x Flow Control，

 

 

 

 

PoE Specification

PoE Standard:   IEEE802.3af/ IEEE802.3at

PoE ports: 1-8 ports   support PoE

Power Output:

Max. 15.4 watts (IEEE   802.3af)

Max. 30 watts (IEEE   802.3at)

PoE port Auto detect   AF/AT devices

Output Voltage:   DC48-57V

Power Pin   Assignment:1/2+;3/6-

Power Type: End-span(   Mid-span optional)

Network Media

10BASE-T: Cat3,4,5 UTP(≤100   meter)

100BASE-TX: Cat5 or   later UTP(≤100 meter)

1000BASE-TX: Cat6 or   later UTP(≤100 meter)

 

Performance Specification

Bandwidth: 16Gbps

Packet Buffer Memory:1Mbits

10 Mbps Packet   Forwarding Rate：14880 pps/port

100Mbps Packet   Forwarfding Rate:148800 pps/port

1000Mbps Packet   Forwarding Rate:1488000pps/port

MAC Address Table: 4K

Switching Delay: <10us

Forwarding Mode

Store-and-Forward

Protection

6KV Lightening   protection, IP40 protection

LED Indicators

Power: PWR; Link; PoE;   Link/Act

 

 

 

Power Supply

Input Power: 48~57VDC (Terminal Block)

Input Power:2* 48~57VDC(Dual power redundancy backup)

Working   Consumption  : <8W

Connectors : Phoenix   terminal

Overload protection     :20A

Reverse polarity protection   : 120s

Alarm contact      : No

 

Working Environment

Working temperature:   -40～+85℃ ;

Storage temperature:   -40～+85℃

Relative Humidity:   5%~95 %( no condensation)

 

 

 

Industry Standard

EMI: FCC Part   15 Subpart B Class A, EN 55022 Class A

 EMS : IEC(EN)61000-4-2(ESD) : ±8kV contact   discharge, ±15kV air discharge

 IEC(EN)61000-4-3(RS) : 10V/m(80～1000MHz)

IEC(EN)61000-4-4(EFT):   Power line: ±4kV; Data line: ±2kV

 IEC(EN)61000-4-5(Surge): Power line:   ±2kVCM/±4kVDM; Data line: ±4kV

 IEC(EN)61000-4-6 (radio frequency   conduction): 3V(10kHz～150kHz), 10V(150kHz～80MHz) IEC(EN)61000-4-16(Common mode conduction) : 30V cont. 300V,1s  

Shock: IEC   60068-2-27 Freefall: IEC 60068-2-32 Vibration: IEC 60068-2-6

Shell

IP40 protect grade,   metal shell

Installation

DIN-Rail or Wall mounts

 

Packing List

1×Industrial PoE Switch   (plus terminal block)

1×User   Manual/Certificate of quality/Warranty card

1×DIN-Rail mounting kit

 

Certification

CE mark, commercial;

FCC Part 15 Class B;

EN 55022 (CISPR 22), Class   B

MTBF

300,000 hours

Weight & Size

Product Weight: 0.9 KG

Product size (L×W×H): 145mm×   100mm× 45mm

Warranty

5-years


Ordering Models

8 Port 10/100M/1000Mbps PoE Unmanaged Industrial Ethernet Switch|Newbridge ND2PG08TX

Shipping & Lead Time

Sample Order: 1-3 business days via DHL/FedEx/UPS.

Bulk Order: 7-15 business days depending on quantity.

OEM/ODM: 25-35 business days including custom packaging.

MOQ: 10 units for standard models; 100 units for OEM branding.

Port: FOB Shenzhen / Hong Kong.

How to Order

1. Click the "Send Enquiry" button above or email info@cnnewbridge.com with your required model and quantity.

2. Our sales team will provide a quotation within 24 hours, including pricing, shipping cost, and estimated delivery time.

3. Confirm the proforma invoice (PI) and arrange payment via T/T, Western Union, or PayPal.

4. Production and quality inspection followed by shipment with tracking number provided.

Send Enquiry

Fill in the form and we'll get back to you within 24 hours.

ND-AHP0820
Product of interest 8 Port 10/100M/1000Mbps PoE Unmanaged Industrial Ethernet Switch|Newbridge ND2PG08TX

Enquiry Submitted!

Thank you for your interest. Our sales team will contact you within 24 hours.